{"id":1190,"date":"2025-08-20T12:01:57","date_gmt":"2025-08-20T10:01:57","guid":{"rendered":"https:\/\/hoenle.cn\/?page_id=1190"},"modified":"2026-01-27T14:11:07","modified_gmt":"2026-01-27T13:11:07","slug":"encapsulation-of-electronic-components","status":"publish","type":"page","link":"https:\/\/hoenle.cn\/en\/products-solutions\/applications\/bonding-potting\/electronics\/encapsulation-of-electronic-components\/","title":{"rendered":"Encapsulation of Electronic Components"},"content":{"rendered":"

[vc_section][vc_row][vc_column width=”1\/2″]\n

\n Encapsulation of<\/span>\n Electronic Components<\/span>\n <\/h1>[\/vc_column][vc_column width=”1\/2″][vc_column_text css=””]Epoxy and acrylate resin based sealing and potting compounds are often used in electronics to protect electronic components, semiconductors and subassemblies. The encapsulation protects components from moisture, dust, dirt and solvents. Used to fill cavities or encapsulate components, sealing compounds also provide effective protection from mechanical stress.[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column width=”1\/4″][\/vc_column][vc_column width=”1\/4″][\/vc_column][vc_column width=”1\/4″]\n
\n \n Request consultation<\/span>\n <\/a>\n <\/div>[\/vc_column][vc_column width=”1\/4″][vc_column_text css=””]Downloads<\/strong><\/p>\n

Smart Adhesive Solutions for PCBs brochure<\/a><\/p>\n

[\/vc_column_text][\/vc_column][\/vc_row][\/vc_section][vc_section css=”.vc_custom_1758803681811{background-color: #FFFFFF !important;}”][vc_row][vc_column width=”2\/3″][vc_column_text css=””]All Hoenle sealing or potting compounds are made without solvent and many have a low ionic content of less than 10 ppm Na+, K+, Cl- and Br-. They therefore provide perfect protection from internal corrosion and reduce local voltaic coupling.[\/vc_column_text][vc_column_text css=””]Many sealing compounds are UV-curing, allowing rapid setting in just a few seconds. This makes them suitable for encapsulating components in fully automated high-volume production. Thermally curing potting compounds, on the other hand, have the advantage of curing even in dark areas that the UV light cannot reach. These encapsulants are also available in black colour for use as a coating or covering.[\/vc_column_text][vc_column_text css=””]A black sealing compound is used to protect mass-produced chips[\/vc_column_text][vc_column_text css=””]The table below lists a selection of encapsulants, sealing and potting compounds from Hoenle. Further products and custom solutions are available on request.[\/vc_column_text][\/vc_column][vc_column width=”1\/3″][vc_single_image image=”268″ img_size=”full” css=””][vc_column_text css=””]A black adhesive is used for encapsulating electronic components[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][vc_column_text css=””]To download the technical datasheets (TDS) please click on the adhesive name.[\/vc_column_text]\n

\n \n \n \n \n
\n
\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n
\n \n \n Adhesive <\/span>\n \n <\/th>\n \n \n \n Application Areas <\/span>\n \n <\/th>\n \n \n \n Viscosity [mPas] <\/span>\n \n <\/th>\n \n \n \n Base <\/span>\n \n <\/th>\n \n \n \n Curing <\/span>\n \n <\/th>\n \n \n \n Special Properties <\/span>\n \n <\/th>\n <\/tr>\n <\/thead>\n \n \n
\n
\n \n Structalit\u00ae 5521<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 1,200-2,000 (Rheometer, 25\u00b0C, 10s^-1) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal at 60\u00b0C <\/span>\n <\/td>\n \n \n
    \n
  • \n Non-conductive <\/li>\n
  • \n Outstanding adhesion to high performance <\/li>\n
  • \n plastics (LCP, PBT) <\/li>\n
  • \n High purity <\/li>\n
  • \n Electronic grade standard <\/li>\n
  • \n Flexible <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 5531<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 5,000-10,000 (Rheometer, 25\u00b0C, 10s^-1) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal at 60\u00b0C <\/span>\n <\/td>\n \n \n
    \n
  • \n Non-conductive <\/li>\n
  • \n Outstanding adhesion to high performance plastics (LCP, PBT) <\/li>\n
  • \n High purity <\/li>\n
  • \n Electronic grade standard <\/li>\n
  • \n Good mechanical stability <\/li>\n
  • \n Good chemical resistance <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 5800<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 7,000-15,000 mix (LVT, 25\u00b0C, Sp. 4\/30 rpm) <\/span>\n <\/td>\n \n \n 2-part epoxy <\/span>\n <\/td>\n \n \n thermal, room temperature <\/span>\n <\/td>\n \n \n
    \n
  • \n High temperature resistance <\/li>\n
  • \n short pot life <\/li>\n
  • \n fast application <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 5801<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 12,000-22,000 mix, 10,000-20,000 part A, 18,000-29,000 part B, (Rheometer, 25 \u00b0C, 10s^-1) <\/span>\n <\/td>\n \n \n 2-part epoxy <\/span>\n <\/td>\n \n \n thermal, room temperature <\/span>\n <\/td>\n \n \n
    \n
  • \n Black color <\/li>\n
  • \n Excellent oil, chemical and moisture resistance <\/li>\n
  • \n Low shrinkage <\/li>\n
  • \n Low water absorption <\/li>\n
  • \n Good adhesion to metal, glass and plastics <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 5802<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 40,000-65,000 mix (Rheometer, 25\u00b0C, 10s^-1) <\/span>\n <\/td>\n \n \n 2-part epoxy <\/span>\n <\/td>\n \n \n thermal, room temperature <\/span>\n <\/td>\n \n \n
    \n
  • \n Dark grey color <\/li>\n
  • \n Excellent oil, chemical and moisture resistance <\/li>\n
  • \n Low shrinkage <\/li>\n
  • \n Low water absorption <\/li>\n
  • \n Good adhesion to metal, glass and plastics <\/li>\n
  • \n Flame classification based on UL 94 HB <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 5810-1<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 3,000-4,000 mix (LVT, 25\u00b0C, Sp. 4\/30 rpm) <\/span>\n <\/td>\n \n \n 2-part epoxy <\/span>\n <\/td>\n \n \n thermal\r\nroom temperature <\/span>\n <\/td>\n \n \n
    \n
  • \n Very high adhesion to PC <\/li>\n
  • \n resistant to moisture and chemicals <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 5891<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • glob top encapsulation<\/li>\n
  • plastic bonding<\/li>\n
  • SMD assembly<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 25,000-50,000 ( Rheometer, 25 \u00b0C, 10s-1 ) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal <\/span>\n <\/td>\n \n \n
    \n
  • \n Black color <\/li>\n
  • \n fast curing at low temperatures <\/li>\n
  • \n impact resistant <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 5891 T<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Frame-material for frame&fill<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 80,000-150,000 (Rheometer, 25 \u00b0C, 10s^-1 ) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal <\/span>\n <\/td>\n \n \n
    \n
  • \n Black color <\/li>\n
  • \n stable frame material, can be applied wet-in-wet with filling material, suitable for frame stacking <\/li>\n
  • \n stable edges <\/li>\n
  • \n resistant to shocks <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 5893<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • needle bonding<\/li>\n
  • plastic bonding<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 6,000-10,000 (Rheometer, 25\u00b0C, 10s^-1) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal <\/span>\n <\/td>\n \n \n
    \n
  • \n Black color <\/li>\n
  • \n excellent flow properties <\/li>\n
  • \n filling material for frame&fill applications <\/li>\n
  • \n high resistance to heat and chemicals <\/li>\n
  • \n certified to ISO 10993-5 standards <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 5894 M<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Glob top encapsulation<\/li>\n
  • Encapsulation of electronic components<\/li>\n
  • Bonding of electronic components<\/li>\n
  • Fill material for frame&fill<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 20,000-30,000 (Rheometer, 25 \u00b0C, 20s ^-1) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal <\/span>\n <\/td>\n \n \n
    \n
  • \n Black color <\/li>\n
  • \n excellent flow properties <\/li>\n
  • \n filling material for frame and fill applications on PCBs, <\/li>\n
  • \n very high resistance to heat and chemicals <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 8801<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Attaching components on PCBs,<\/li>\n
  • Encapsulation of electronic components,,<\/li>\n
  • Encapsulation of plastic parts,<\/li>\n
  • Potting material<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 30,000-45,000 (LVT, 25\u00b0C, Sp. 4\/6 rpm) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal <\/span>\n <\/td>\n \n \n
    \n
  • \n Epoxy-based resin <\/li>\n
  • \n resistant to high temperatures and oil\/grease <\/li>\n
  • \n perfect choice for ring applications <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 8801 black<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 30,000-45,000 <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal <\/span>\n <\/td>\n \n \n
    \n
  • \n Resistant to oils, grease and fuels <\/li>\n
  • \n black color <\/li>\n
  • \n excellent flow properties <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 8801 T<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 16,000-30,000 (Rheometer, 25 \u00b0C, 5s^-1) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal <\/span>\n <\/td>\n \n \n
    \n
  • \n Resistant to oils, grease and fuels; <\/li>\n
  • \n Stable; <\/li>\n
  • \n Fast curing at low temperatures <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 8805<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 30,000-45,000 <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal <\/span>\n <\/td>\n \n \n
    \n
  • \n Resistant to oils, grease and fuels <\/li>\n
  • \n excellent flow properties <\/li>\n
  • \n beige color <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 8838<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Attaching components on PCBs;<\/li>\n
  • Encapsulation or potting of electronic components<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 6,500-7,500 (Rheometer, 25\u00b0C, 20s^-1) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal <\/span>\n <\/td>\n \n \n
    \n
  • \n Black color <\/li>\n
  • \n flexible potting compound <\/li>\n
  • \n excellent flow properties <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 1600 LV<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Glob Top<\/li>\n
  • Potting Material<\/li>\n
  • Encapsulation of electronic components<\/li>\n
  • Conformal Coating<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 3,000-5,000 <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n Very high Tg <\/li>\n
  • \n low water absorption <\/li>\n
  • \n low ion content <\/li>\n
  • \n very high chemical resistance <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 1605<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • optical cement<\/li>\n
  • lens bonding cement<\/li>\n
  • glass bonding<\/li>\n
  • medical device bonding<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 200-400 (LVT, 25\u00b0C, Sp. 2\/30 rpm) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n low shrinkage <\/li>\n
  • \n low heat expansion <\/li>\n
  • \n very high tg <\/li>\n
  • \n excellent chemical resistance <\/li>\n
  • \n certified to ISO 10993-5 standards <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 1650<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Fill for frame&fill<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 3,000-5,000 <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV <\/span>\n <\/td>\n \n \n
    \n
  • \n Electronic grade <\/li>\n
  • \n low ion content <\/li>\n
  • \n suitable for chip protection <\/li>\n
  • \n UL94 HB test passed <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 1655<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Medical devices bonding<\/li>\n
  • Flexible potting<\/li>\n
  • Optics<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 150-300 (Brookfield LVT, 25 \u00b0C, Sp. 2\/30 rpm) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n flexible <\/li>\n
  • \n certified to USP Class VI and ISO 10993-5 standards <\/li>\n
  • \n resistant to all common sterilization methods <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 1671<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Frame material for frame & fill applications<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 9,000-14,000 (Rheometer, 10s^-1) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n Stable frame compound <\/li>\n
  • \n high ion purity <\/li>\n
  • \n electronic grade adhesive <\/li>\n
  • \n high temperature conductivity <\/li>\n
  • \n low water absorption <\/li>\n
  • \n UL94 HB test passed <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 1688<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • glob top encapsulation<\/li>\n
  • conformal coating<\/li>\n
  • encapsulation of electronic components<\/li>\n
  • chip encapsulation<\/li>\n
  • potting material<\/li>\n
  • smart card<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 1,200-2,000 <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV <\/span>\n <\/td>\n \n \n
    \n
  • \n Excellent flow properties and leveling <\/li>\n
  • \n electronic grade adhesive <\/li>\n
  • \n low ion content <\/li>\n
  • \n suitable for chip protection <\/li>\n
  • \n excellent resistance to heat and humidity <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 1691<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Fill for frame&fill<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 20,000-40,000 <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n black color <\/li>\n
  • \n high ion purity <\/li>\n
  • \n electronic grade adhesive <\/li>\n
  • \n high temperature resistance <\/li>\n
  • \n fast surface curing with UV light <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 1722<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 5,000-8,000 (LVT, 25 \u00b0C, Sp. 4\/30 rpm) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV <\/span>\n <\/td>\n \n \n
    \n
  • \n Very high adhesion to most thermoplastics <\/li>\n
  • \n low shrinkage <\/li>\n
  • \n high temperature resistance <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 2004 F<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 60-100 (LVT, 25 \u00b0C, Sp. 2\/30 rpm) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n fluorescing <\/li>\n
  • \n flexible <\/li>\n
  • \n autoclavable <\/li>\n
  • \n dry surface after curing <\/li>\n
  • \n low ion content <\/li>\n
  • \n sprayable <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 2007 F<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 150-350 (LVT, 25 \u00b0C, Sp. 2\/30 rpm) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n fluorescing <\/li>\n
  • \n flexible <\/li>\n
  • \n autoclavable <\/li>\n
  • \n excellent chemical resistance <\/li>\n
  • \n low ion content <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 2009 F<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 100-200 <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n fluorescing <\/li>\n
  • \n flexible <\/li>\n
  • \n autoclavable <\/li>\n
  • \n high chemical resistance <\/li>\n
  • \n low ion content <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 2028<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Conformal Coating,<\/li>\n
  • Encapsulation of electronic components<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 160-300 <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n Dry surface after UV-curing <\/li>\n
  • \n autoclavable <\/li>\n
  • \n excellent chemical resistance <\/li>\n
  • \n scratch resistant coating <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 4451 MV F<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 2,000-3,000 (LVT, 25 \u00b0C, Sp. 4\/30 rpm) <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV, VIS <\/span>\n <\/td>\n \n \n
    \n
  • \n soft and elastic <\/li>\n
  • \n dry surface after curing <\/li>\n
  • \n protective coating <\/li>\n
  • \n fast curing <\/li>\n
  • \n fluorescing blue <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 5140<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Sealing electrical assemblies,<\/li>\n
  • breathing masks<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 250-500 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • \n Flexible, <\/li>\n
  • \n well suited for bonding plastics with low UV translucence and permeable to visible light, <\/li>\n
  • \n biocompatible: certified to USP Class VI standards <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 6103 <\/strong>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 3,500-5,000 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n Very high adhesion to metals and sintered materials <\/li>\n
  • \n transparent <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 6104<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Encapsulation of electronic components<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 3,000-8,000 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n Very high adhesion to metals and sintered materials <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 6104 VT<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 8,000-17,000 (Rheometer, 25\u00b0C, 10s^-1) <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n Very high adhesion to metals and sintered materials <\/li>\n
  • \n ideal for bonding large components on circuit boards (corner bonding) <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 6105 <\/strong>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 3,500-6,000 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n very high adhesion to metals and sintered materials <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 6125<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 4,000-6,000 (LVT 25\u00b0C, Sp. 4\/30 rpm) <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n excellent adhesion to stone, glass, metals and thermoplastics <\/li>\n
  • \n medium viscosity <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 6128<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 800-1,200 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n very high adhesion to stone, glass, metals and thermoplastics <\/li>\n
  • \n high temperature resistance <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 6128 VT<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 3,000-6,000 (Rheometer, 25\u00b0C, 10s^-1) <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n contains chemical activator <\/li>\n
  • \n high temperature resistance <\/li>\n
  • \n high viscosity <\/li>\n
  • \n excellent adhesion to stone, glass, metals and thermoplastics <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 9179<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 200-400 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV <\/span>\n <\/td>\n \n \n
    \n
  • \n Fast curing <\/li>\n
  • \n very well suited for automated production lines <\/li>\n
  • \n yellow color <\/li>\n
  • \n dry surface <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 9180<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 700-1,200 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV <\/span>\n <\/td>\n \n \n
    \n
  • \n Dry surface <\/li>\n
  • \n fast curing of thick layers <\/li>\n
  • \n yellow color <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 9181<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 4,000-7,000 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV <\/span>\n <\/td>\n \n \n
    \n
  • \n Yellow color <\/li>\n
  • \n dry surface <\/li>\n
  • \n fast curing of thick layers <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae UD 5180<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Fixing components,<\/li>\n
  • sensor encapsulation in automotive\/aerospace industry,<\/li>\n
  • bonding lenses,<\/li>\n
  • bonding plastic parts and plastic housings<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 4,000-6,000 <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • \n Perfect solution for bonding flexible circuit paths <\/li>\n
  • \n resistant to reflow processes <\/li>\n
  • \n grey color <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae UD 8055<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Protective encapsulation of electronic components on PCBs<\/li>\n
  • Consumer electronics<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 5,000-8,000 (Rheometer, 25\u00b0C, 10s^-1) <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS\r\nmoisture cure <\/span>\n <\/td>\n \n \n
    \n
  • \n High Tg <\/li>\n
  • \n Fast curing <\/li>\n
  • \n Compatible with flux <\/li>\n
  • \n Low ion content <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae UD 8056<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Consumer Electronics<\/li>\n
  • Protective encapsulation of electronic components on PCBs<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 3,000-6,000 (Rheometer, 25\u00b0C, 10s^-1) <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV \/ VIS \/ Moisture postcuring <\/span>\n <\/td>\n \n \n
    \n
  • \n High Tg, fast curing <\/li>\n
  • \n Compatible with flux <\/li>\n
  • \n Low ion content <\/li>\n
  • \n Passed UL94 HB test <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae VBB-1<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Encapsulation of electronic components<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 1,000-1,500 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n