{"id":1469,"date":"2025-08-20T18:06:57","date_gmt":"2025-08-20T16:06:57","guid":{"rendered":"https:\/\/hoenle.cn\/?page_id=1469"},"modified":"2026-01-27T14:11:13","modified_gmt":"2026-01-27T13:11:13","slug":"fixing-plastic-components","status":"publish","type":"page","link":"https:\/\/hoenle.cn\/en\/products-solutions\/applications\/bonding-potting\/plastic-glue\/fixing-plastic-components\/","title":{"rendered":"Fixing Plastic Components"},"content":{"rendered":"

[vc_section][vc_row][vc_column width=”1\/2″]\n

\n Fixing<\/span>\n Plastic Components<\/span>\n <\/h1>[vc_column_text css=””]Plastic components are often held in place with adhesives to prevent their sliding out of place during further processing. Especially acrylic-based products adhere well to many plastics. They have a reinforcing and supporting effect to dissipate loads and reduce stresses. Acrylates have the added advantage of curing very quickly under UV light, thereby speeding up processing times to allow higher production volumes. Epoxy adhesives, which also cure quickly under UV light, are resistant to higher temperatures. Cyanacrylates are used for bonding UV-blocked or light impermeable substrates, as they are self-curing at room temperature.[\/vc_column_text]\n
\n \n Request consultation<\/span>\n <\/a>\n <\/div>[\/vc_column][vc_column width=”1\/2″][vc_single_image image=”1821″ img_size=”full” css=””][\/vc_column][\/vc_row][\/vc_section][vc_section css=”.vc_custom_1759913867939{background-color: #FFFFFF !important;}”][vc_row][vc_column][vc_column_text css=””]The table below lists a selection of adhesives that are suitable for holding plastic components. Further products and custom solutions are available on request. To download the technical datasheets (TDS) please click on the adhesive name.[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column]\n
\n \n \n \n \n
\n
\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n
\n \n \n Adhesive <\/span>\n \n <\/th>\n \n \n \n Application Areas <\/span>\n \n <\/th>\n \n \n \n Viscosity [mPas] <\/span>\n \n <\/th>\n \n \n \n Base <\/span>\n \n <\/th>\n \n \n \n Curing <\/span>\n \n <\/th>\n \n \n \n Substrates <\/span>\n \n <\/th>\n \n \n \n Special Properties <\/span>\n \n <\/th>\n <\/tr>\n <\/thead>\n \n \n
\n
\n \n Cyanolit\u00ae 200<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 1-3 <\/span>\n <\/td>\n \n \n cyanoacrylate <\/span>\n <\/td>\n \n \n moisture,\r\nroom temperature <\/span>\n <\/td>\n \n \n
    \n
  • Ideal for bonding PVC, ABS, PA (Polyamid), PC, EPDM<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Capillary flow <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Cyanolit\u00ae 201<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 1-3 <\/span>\n <\/td>\n \n \n cyanoacrylate <\/span>\n <\/td>\n \n \n moisture,\r\nroom temperature <\/span>\n <\/td>\n \n \n
    \n
  • Ideal for bonding PVC, ABS, PC, PA<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Capillary flow <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Cyanolit\u00ae 202<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 70-100 <\/span>\n <\/td>\n \n \n cyanoacrylate <\/span>\n <\/td>\n \n \n moisture,\r\nroom temperature <\/span>\n <\/td>\n \n \n
    \n
  • Ideal for bonding PVC, ABS, PC, PA<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Capillary flow <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Cyanolit\u00ae 203 TX<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Bonding hose unions,<\/li>\n
  • bridging large gaps,<\/li>\n
  • suitable for porous materials<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n shear thinning <\/span>\n <\/td>\n \n \n cyanoacrylate <\/span>\n <\/td>\n \n \n moisture,\r\nroom temperature <\/span>\n <\/td>\n \n \n
    \n
  • Ideal for bonding PA, PC, ABS, PVC, EPDM<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Biocompatible: certified to USP Class VI standards <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Cyanolit\u00ae 811 F<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 4-12 (LVT, 25 \u00b0C, Sp. 2\/60 rpm) <\/span>\n <\/td>\n \n \n cyanoacrylate <\/span>\n <\/td>\n \n \n moisture,\r\nroom temperature <\/span>\n <\/td>\n \n \n
    \n
  • Ideal for bonding PMMA, PVC, ABS, PA (polyamid), PC (polycarbonate)<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n odorless <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Cyanolit\u00ae Gel 10<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 100,000-240,000 <\/span>\n <\/td>\n \n \n cyanoacrylate <\/span>\n <\/td>\n \n \n moisture,\r\nroom temperature <\/span>\n <\/td>\n \n \n
    \n
  • Ideal for bonding polycarbonate (PC), PMMA, PVC, ABS, PA<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Shear thinning <\/li>\n
  • \n gel-like <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 5604<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 25,000-40,000 (Rheometer, 25 \u00b0C, 10s^-1) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PA (Polyamid), PI, FR4, PET<\/li>\n
  • Bonding plastics in combination with various other plastics<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Fast curing <\/li>\n
  • \n red color <\/li>\n
  • \n fixing components on PCBs <\/li>\n
  • \n SMD applications <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 5820<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 20,000-25,000 <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal <\/span>\n <\/td>\n \n \n
    \n
  • Bonding FR4, PA\/Polyamid\u00a0<\/li>\n
  • Bonding plastics in combination with various other plastics<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n transparent <\/li>\n
  • \n high adhesion to metals <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Structalit\u00ae 5891<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • glob top encapsulation<\/li>\n
  • plastic bonding<\/li>\n
  • SMD assembly<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 25,000-50,000 ( Rheometer, 25 \u00b0C, 10s-1 ) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n thermal <\/span>\n <\/td>\n \n \n
    \n
  • FR4 bonding<\/li>\n
  • Bonding plastics in combination with various other plastics<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Black color <\/li>\n
  • \n fast curing at low temperatures <\/li>\n
  • \n impact resistant <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 1703<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Hose connections,<\/li>\n
  • blood filters<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 85,000-130,000 (LVT, 25 \u00b0C, Sp. 4\/3 rpm) <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PC, ABS, SAN, hard-PVC<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Shear thinning <\/li>\n
  • \n Shape retaining <\/li>\n
  • \n Certified according to USP Class VI <\/li>\n
  • \n Resistant to sterilization <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 1722<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 5,000-8,000 (LVT, 25 \u00b0C, Sp. 4\/30 rpm) <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV <\/span>\n <\/td>\n \n \n
    \n
  • Bonding thermoplastics<\/li>\n
  • Bonding FR4 or ABS<\/li>\n
  • suitable for bonding pretreated PET<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Very high adhesion to most thermoplastics <\/li>\n
  • \n low shrinkage <\/li>\n
  • \n high temperature resistance <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 4730<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 70-150 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PC (Polycarbonate)<\/li>\n
  • hard-PVC, PET, ABS, SAN<\/li>\n
  • PMMA (Plexiglas\u00ae, acrylic glass)<\/li>\n
  • Joining glass and plastics<\/li>\n
  • Joining metals to plastics<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Capillary flow <\/li>\n
  • \n flexible and tear-proof adhesive <\/li>\n
  • \n suitable for potting <\/li>\n
  • \n dry surface <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 4731<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Bonding of flexible components;<\/li>\n
  • Attaching components on PCBs<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 900-1,500 (LVT, 25\u00b0C, Sp. 3\/30 rpm) <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PC \/Makrolon, hard-PVC, PET, ABS, SAN, PMMA (Plexiglas\u00ae, acrylic glass)<\/li>\n
  • Bonding glass, steel, stainless steel, aluminium, brass<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Dry surface after curing, <\/li>\n
  • \n biocompatible: certified to USP Class VI and ISO 10993-5 standards <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 4731 VT<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Bonding of flexible components;<\/li>\n
  • Attaching components on PCBs<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 4,000-8,000 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • bonding PC (Makrolon), hard-PVC, PET, ABS, SAN, PMMA (Plexiglas\u00ae, acrylic glass)<\/li>\n
  • joining glass and plastics<\/li>\n
  • joining metals to plastics<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n dry surface after curing <\/li>\n
  • \n flexible and tear-proof <\/li>\n
  • \n excellent adhesion to many plastics <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 4732 VT<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 7,000-9,000 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PMMA (Plexiglas\u00ae, acrylic glass), hard-PVC, PET, ABS, SAN, PC<\/li>\n
  • Joining glass and plastics<\/li>\n
  • Joining metals to plastics<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Very high adhesion to many plastics <\/li>\n
  • \n dry surface after curing <\/li>\n
  • \n flexible and tear-proof <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 4735 HC<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 700-1,000 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PC, PMMA (Plexiglas\u00ae, acrylic glass), hard-PVC, PET, ABS, SAN<\/li>\n
  • Joining glass and plastics<\/li>\n
  • Joining metals to plastics<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Very high adhesion to many plastics <\/li>\n
  • \n dry surface after curing <\/li>\n
  • \n flexible and tear-proof <\/li>\n
  • \n suitable for potting <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 5140<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Sealing electrical assemblies,<\/li>\n
  • breathing masks<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 250-500 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding ABS, PMMA (Plexiglas\u00ae, acrylic glass), hard-PVC, PET, SAN, PC<\/li>\n
  • Joining glass and plastics<\/li>\n
  • Joining metals to plastics<\/li>\n
  • Joining plastics with various substrates<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Flexible, <\/li>\n
  • \n well suited for bonding plastics with low UV translucence and permeable to visible light, <\/li>\n
  • \n biocompatible: certified to USP Class VI standards <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 5140 VT<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • encapsulation of electronic components<\/li>\n
  • CIPG and liquid seals<\/li>\n
  • plastic bonding<\/li>\n
  • plastic film lamination<\/li>\n
  • medical technology<\/li>\n
  • potting material<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 5,000-10,000 (Rheometer, 25\u00b0C, 10s^-1) <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PET, PMMA (Plexiglas\u00ae, acrylic glass), PC, ABS, SAN, hard-PVC<\/li>\n
  • Joining plastics and glass<\/li>\n
  • Joining plastics and metals<\/li>\n
  • Joining plastics to various substrates<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n High resistance to thermal stress and moisture <\/li>\n
  • \n Flexible and stable <\/li>\n
  • \n Low shrinkage, optically clear <\/li>\n
  • \n Joining dissimilar subjects <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 7090 VHS<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Bonding catheters,<\/li>\n
  • needle bonding<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 40-100 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PC (Makrolon), hard-PVC, ABS, SAN<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Dry surface, <\/li>\n
  • \n very high adhesion to plastics, <\/li>\n
  • \n biocompatible: certified to USP Class VI standards <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 7311<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • plastics \/glass bonding<\/li>\n
  • suitable for elastic bonding of large surfaces<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 30-100 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PC (polycarbonate)<\/li>\n
  • PVC, PMMA,<\/li>\n
  • ABS, glass and metals<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n High resistance to alcohols and moisture <\/li>\n
  • \n non-yellowing <\/li>\n
  • \n very high adhesion to plastics, glass and metals <\/li>\n
  • \n suitable for bonding large areas <\/li>\n
  • \n certified according to USP Class VI <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 7313<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Bonding plastic parts<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 40-70 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding plastics such as<\/li>\n
  • PC, PVC, ABS<\/li>\n
  • Bonding glass and metals<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Flexible <\/li>\n
  • \n high elongation at break <\/li>\n
  • \n perfect solution for bonding large surfaces <\/li>\n
  • \n very high adhesion to plastics <\/li>\n
  • \n glass and metals <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 7631<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 100-300 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PMMA (Plexiglas\u00ae, acrylic glass), PC, PVC<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Very high shear strength and bond strength <\/li>\n
  • \n excellent adhesion to plastics <\/li>\n
  • \n capillary flow behavior <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 7641<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 10-100 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PMMA (Plexiglas\u00ae, acrylic glass), PC, PVC<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Specially formulated for bonding PMMA <\/li>\n
  • \n high adhesion <\/li>\n
  • \n capillary flow <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 7642<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 1,500-2,500 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PMMA (Plexiglas\u00ae, acrylic glass), PC, PVC<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Excellent adhesion to many plastics <\/li>\n
  • \n high bond strength <\/li>\n
  • \n excellent flow properties <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 7989<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Plastic bonding,<\/li>\n
  • bonding containers<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 3,000-5,000 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV <\/span>\n <\/td>\n \n \n
    \n
  • Bonding hard-PVC, ABS, SAN, PUR, PC<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Excellent adhesion to plastics, especially to PC and PMMA; <\/li>\n
  • \n biocompatible: certified to USP Class VI standards <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae 9140 VL<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 1,000-2,000 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PMMA (Plexiglas\u00ae, acrylic glass), PC, PVC, ABS<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Flexible <\/li>\n
  • \n high resistance to moisture <\/li>\n
  • \n cures thick layers of adhesive <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae UD 5134<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 15,000-25,000 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PMMA (Plexiglas\u00ae, acrylic glass), PC, PET, ABS, SAN, FR4, PBT, hard-PVC<\/li>\n
  • Bonding plastics and metals<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Acrylate-Hybrid <\/li>\n
  • \n low thermal expansion <\/li>\n
  • \n low shrinkage <\/li>\n
  • \n impact resistant <\/li>\n
  • \n dry surface <\/li>\n
  • \n grey color <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae UD 5180<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Fixing components,<\/li>\n
  • sensor encapsulation in automotive\/aerospace industry,<\/li>\n
  • bonding lenses,<\/li>\n
  • bonding plastic parts and plastic housings<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 4,000-6,000 <\/span>\n <\/td>\n \n \n epoxy <\/span>\n <\/td>\n \n \n UV\r\nsecondary heat cure <\/span>\n <\/td>\n \n \n
    \n
  • thermoplastics<\/li>\n
  • PA<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Perfect solution for bonding flexible circuit paths <\/li>\n
  • \n resistant to reflow processes <\/li>\n
  • \n grey color <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae UV 2113<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Potting<\/li>\n
  • Sealing<\/li>\n
  • Protection of sensitive components<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 19,000-32,000 (Rheometer, 25\u00b0C, 10s^-1) <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PMMA (Plexiglas\u00ae, acrylic glass), PC, PET, ABS, SAN, FR4, PBT, hard-PVC<\/li>\n
  • Bonding plastics and metals<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Acrylate hybrid <\/li>\n
  • \n superior strength <\/li>\n
  • \n low thermal expansion <\/li>\n
  • \n impact resistant <\/li>\n
  • \n low shrinkage <\/li>\n
  • \n resistant to soldering stress <\/li>\n
  • \n excellent flow properties <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae UV 2115<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 20,000-30,000 (Rheometer, 25\u00b0C, 50s^-1) <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n -\n <\/span>\n <\/td>\n \n \n
    \n
  • \n Acrylate hybrid <\/li>\n
  • \n superior strength <\/li>\n
  • \n low thermal expansion <\/li>\n
  • \n low shrinkage <\/li>\n
  • \n impact resistant <\/li>\n
  • \n resistant to soldering stress <\/li>\n
  • \n paste-like <\/li>\n
  • \n stable and high viscous <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae VBB 1 Gel<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 12,000-30,000 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PC (Polycarbonate), PMMA<\/li>\n
  • Bonding plastics to glass<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Elastic <\/li>\n
  • \n high peel strength <\/li>\n
  • \n optically clear <\/li>\n
  • \n very flexible <\/li>\n
  • \n stable gel <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae VBB-1<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n
    \n
  • Encapsulation of electronic components<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n 1,000-1,500 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PC (Polycarbonate), PMMA<\/li>\n
  • Bonding plastics to glass<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n
    \n
  • \n Elastic <\/li>\n
  • \n high peel strength <\/li>\n
  • \n optically clear <\/li>\n
  • \n very flexible <\/li>\n
  • \n suitable for potting <\/li>\n <\/ul>\n <\/span>\n <\/td>\n <\/tr>\n
\n
\n \n Vitralit\u00ae VBB-N<\/strong>\n \n <\/a>\n <\/div>\n <\/td>\n
\n \n -\n <\/span>\n <\/td>\n \n \n 50-150 <\/span>\n <\/td>\n \n \n acrylate <\/span>\n <\/td>\n \n \n UV\r\nVIS <\/span>\n <\/td>\n \n \n
    \n
  • Bonding PC (Makrolon)<\/li>\n
  • PMMA (Plexiglas\u00ae, acrylic glass)<\/li>\n
  • Bonding plastics to glass<\/li>\n <\/ul>\n <\/span>\n <\/td>\n
\n \n